Open Access 
Downloads
Download data is not yet available.
Abstract
A Wind Turbine Emulator (WTE) is a equipment which closely imitates the dynamic characteristics of a wind turbine. It is developed for testing the performance and control algorithm power converter of a wind energy conversion system in a lab. The structure of this emulator is usually built on the basis of a rotating system which consists of two electrical machines coupling together. In this paper, the development of a non-rotating WTE is presented. The proposed WTE is built using hardware-in-the-loop method implemented on the dSPACE 1103 system and a buck converter. Experimental setup and results are shown to verify the validation of the proposed system.
Author's Affiliation
Article Details
Issue: Vol 1 No 1 (2018)
Page No.: 28-34
Published: Aug 1, 2019
Section: Research article
DOI: https://doi.org/10.15419/stdjet.v1i1.525
Copyright Info
Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
How to Cite
Dung, P. Q., Phuc, T. H., Du, T. D., & Thang, P. N. (2019). Development of a non-rotating wind turbine emulator. VNUHCM Journal of Engineering and Technology, 1(1), 28-34. https://doi.org/https://doi.org/10.15419/stdjet.v1i1.525
Download Citation
Cited by
Article Statistics
HTML = 1026 times
Download PDF = 540 times
Total = 540 times
Download PDF = 540 times
Total = 540 times
