Open Access

Downloads

Download data is not yet available.

Abstract

Diagnostic testing of power transformers plays an important role in detection of implicit failures, avoiding the possibilities of increased failure level or even breakdown for the most expensive equipment in power systems, which affects the operation reliability. Currently advanced diagnostic testing techniques such as Frequency Response Analysis, Dielectric Frequency Response etc. have been applied in addition with traditional ones but the efficiency is not as expected. In order to improve the diagnostic quality and the application feasibility of advanced techniques, this paper proposes a new method in determining main parameters in an equivalent circuit of several typical 110-kV power transformers based on the Frequency Response Analysis technique. The results show that the proposed method could be applied in improving the diagnostic quality for current failures of investigated power transformers.



Author's Affiliation
Article Details

Issue: Vol 1 No 2 (2018)
Page No.: 5-14
Published: Aug 22, 2019
Section: Research article
DOI:

 Copyright Info

Creative Commons License

Copyright: The Authors. This is an open access article distributed under the terms of the Creative Commons Attribution License CC-BY 4.0., which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

 How to Cite
Nguyen, H., Ngo, H., Pham, T., & Pham, K. (2019). Identification of electrical parameters of power transformers applicable to failure diagnosis. Science and Technology Development Journal - Engineering and Technology, 1(2), 5-14. Retrieved from http://stdjet.scienceandtechnology.com.vn/index.php/stdjet/article/view/559

 Cited by



Article level Metrics by Paperbuzz/Impactstory
Article level Metrics by Altmetrics

 Article Statistics
HTML = 37 times
Download PDF   = 19 times
Total   = 19 times